BHEL Township is one of Bhopal's most planned and disciplined localities, consisting of residential quarters, educational institutions and administrative buildings. Amit Glass Emporium supports BHEL projects with glass and aluminium solutions that prioritise safety, neat finishing and long service life. All toughened glass we install is heat-treated to 4-5x the strength of standard annealed glass and certified to break into small granules rather than sharp shards if impacted.
Starting ₹120 – ₹300 per sq.ft
WhatsApp UsMeets Indian safety standards for toughened glass.
Heat-treated for higher impact and thermal resistance.
Fractures into small granules, not sharp shards, on impact.
Toughened (tempered) glass is produced by heating standard annealed glass to a high temperature and then rapidly cooling its surface, a process that puts the outer layers into compression and the core into tension. The result is a pane that is several times stronger than untreated glass and, critically, one that fractures into small, relatively blunt granules rather than long dangerous shards if it does break. This is why Indian building codes and most architects specify toughened glass by default for doors, large windows, railings, partitions and any glazing at floor level or in high-traffic areas across residential and commercial projects in MP.
Heat-treated glass withstands significantly higher impact and thermal stress than untreated annealed glass of the same thickness.
If broken, toughened glass fractures into small granules instead of sharp shards, sharply reducing injury risk.
Handles rapid temperature swings — direct sun followed by rain, for instance — without cracking the way ordinary glass can.
Meets IS 2553 requirements commonly specified for doors, railings and glazing at floor level or high-traffic areas.
Used as the base glass for windows, railings, partitions, shower cubicles and structural glazing alike.
Standard heat-treated float glass — the most common and economical toughened option for windows, doors and railings.
Bronze, grey or green toughened glass for glare and heat reduction, commonly used on west-facing façades.
Toughened after etching for a privacy finish that still carries full safety-glass strength — common in shower and partition applications.
Two toughened panes bonded with a PVB interlayer, so the assembly holds together and stays in the frame even if a pane cracks.
An additional heat-soak test cycle applied after toughening to screen out nickel-sulphide inclusion defects — specified for critical structural and overhead glazing.
| Item | Price |
|---|---|
| 6mm Clear Toughened Glass | ₹90 – ₹130 / sq.ft |
| 8mm Clear Toughened Glass | ₹120 – ₹170 / sq.ft |
| 10mm Clear Toughened Glass | ₹160 – ₹220 / sq.ft |
| 12mm Clear Toughened Glass | ₹200 – ₹280 / sq.ft |
| Tinted / Frosted Toughened Glass | +₹20 – ₹40 / sq.ft over clear |
| Laminated Toughened Glass | ₹280 – ₹420 / sq.ft |
A globally established glass manufacturer with a strong presence in India across float, toughened and processed glass for construction.
One of India's largest integrated glass manufacturers, widely specified for toughened and safety glass across residential and commercial projects.
An established Indian glass processing brand offering toughened, laminated and other safety glass products.
An Indian glass manufacturer known for float and toughened glass supplied to fabricators and contractors across the country.
A major float glass producer whose base glass is commonly processed into toughened and laminated products used across India.
Common for smaller shower panels, cabinet doors and light-duty applications.
A widely used mid-range thickness for windows, partitions and standard doors.
The typical thickness for railings, larger doors and structural balustrade panels.
Used for taller railings, larger unsupported spans or where code requires additional thickness.
Two toughened layers with a PVB interlayer for retention strength — used where panel security after breakage matters.
Additional-tested toughened glass specified for overhead glazing, spider-fitting facades and other critical structural uses.
Glass-to-glass or glass-to-frame connector used on frameless toughened glass doors.
Hydraulic door closer set into the floor, standard hardware for frameless toughened glass doors.
Structural point-fixing hardware used to hold large toughened glass panels on façades with minimal visible framework.
Hardware fitted through drilled holes in toughened glass doors, sized and positioned before the toughening process.
Fittings used to mount toughened glass panels to walls, posts or structural steel in railing and partition applications.
Cushioning blocks placed in frames or channels to prevent glass-to-metal contact stress on toughened panels.
Frameless and framed toughened glass doors for offices, showrooms and homes, drilled for patch fittings before toughening.
Larger panes and ground-floor windows commonly specified in toughened glass for safety compliance.
The default glass type for balcony, staircase and terrace railings due to its load and impact rating.
Floor-to-ceiling office and home partitions specified in toughened glass, especially where panels are large.
Toughened glass is the standard for shower cubicles given the constant impact and moisture exposure.
Toughened glass for dining and office table tops where everyday impact resistance matters.
Heat-soaked toughened glass used in point-fixed structural glazing on commercial elevations.
Toughened glass needs very little upkeep: clean with a standard glass cleaner and soft cloth to avoid scratching the surface; inspect edges periodically for chips, since damaged edges are the most common trigger for spontaneous breakage in toughened glass; avoid striking corners or edges with hard objects during cleaning or furniture moves; and for structural or railing installations, have fixing hardware checked annually to ensure clamps and fittings haven't loosened.