Understand Before You Buy

How Our Pricing Actually Works

Every specification on this page — a particular glass thickness, an aluminium section, a UPVC profile — has one base rate. That base rate is then adjusted in two ways to arrive at the number you finally pay. First, a material grade multiplier is applied, corresponding to the Economical, Standard, Premium tiers shown throughout this page. Second, a location multiplier is applied based on your district, which accounts for local transport distance, site access and regional labour cost — this is why the general figures on this page (calculated at our state-wide baseline factor) can differ slightly from the number a city-specific calculator shows you.

On top of the base × grade × location calculation, any optional add-ons you select — a thicker glass pane, an anti-reflective or acoustic coating, a mosquito mesh panel, a heavier-duty lock — are added as either a flat charge per line item or a per-square-foot/per-running-foot surcharge, depending on the add-on. All of this is transparent inside the calculator: nothing is bundled into a single opaque number you can't break down.

Finally, 18% GST is added on top of the material and installation total, shown as its own line rather than folded silently into the headline price — so the number you see quoted is always the number before tax, and you know exactly what the tax adds before you commit.

What the three grades mean in practice: Economical uses standard-quality material and finish suited to budget-conscious projects and secondary spaces; the middle tier balances cost against a noticeably better finish, hardware and tolerance; and Premium uses the highest-grade material, tighter fabrication tolerances and premium hardware brands, aimed at street-facing facades, client areas, and villas where finish quality is part of the design brief. The distinction is about craftsmanship and material quality, not the country of origin of the glass or aluminium.

From Enquiry to Installation

How a Project With Us Actually Works

1. Instant estimate. Use the calculator for your category and city to get a planning-stage estimate in minutes, with tier and add-on options you can adjust yourself before committing to anything.
2. Free site visit & measurement. Our team visits your site to take exact measurements, check access and structural conditions, and understand the finish you're after — the online estimate is a starting point, not a substitute for this step.
3. Written quotation. You receive an itemised quotation listing every specification, grade, add-on and the GST breakdown — nothing bundled into one opaque total.
4. Fabrication. Once confirmed, glass is cut and processed and aluminium/UPVC sections are fabricated to your exact measurements at our facility — nothing here is an off-the-shelf standard size unless you specifically want one.
5. Installation. Our own installation team fits the finished work on site, typically within 3 to 10 working days of material dispatch depending on project size and complexity.
6. Handover & warranty. You receive workmanship warranty terms alongside the manufacturer warranty on glass, aluminium and hardware, plus basic care guidance so the installation lasts.

After Installation

Maintenance & Care Tips

Glass and aluminium work is largely low-maintenance, but a little routine care meaningfully extends its life and keeps it looking new. Clean glass surfaces with a mild, non-abrasive glass cleaner and a soft cloth or squeegee — avoid abrasive powders or scouring pads, which can dull the surface over time, especially on coated or low-iron glass.

For aluminium and UPVC windows and doors, periodically vacuum or brush out the sliding tracks to remove dust and grit, which is the most common cause of a sliding window becoming stiff. A drop of silicone-based lubricant (not oil-based, which attracts dust) on hinges, rollers and locks once or twice a year keeps hardware moving smoothly.

Inspect silicone sealant joints around glass railings, shower enclosures and facade panels annually — sealant naturally degrades with UV exposure and temperature cycling over several years, and resealing a joint early is far cheaper than repairing water ingress later.

For ACP-clad or powder-coated facades, an annual wash-down with water and a mild detergent removes accumulated dust and pollution film, particularly important in industrial belts like Mandideep or along busy commercial roads, where surface grime builds up faster than in quieter residential areas.

Service Area

Districts We Serve Across Madhya Pradesh

From our base in Bhopal, we execute glass, aluminium, UPVC and facade projects across all major divisions of Madhya Pradesh — Bhopal, Indore, Gwalior, Jabalpur, Ujjain, Sagar, Rewa, Narmadapuram and Chambal, and the districts within them. Our priority-location calculators cover the state's largest cities directly; for any of the districts listed below, request a quote and we'll confirm coverage and any applicable transport charge for your specific site.

Agar Malwa, Alirajpur, Anuppur, Ashoknagar, Balaghat, Barwani, Betul, Bhind, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dindori, Guna, Gwalior, Harda, Indore, Jabalpur, Jhabua, Katni, Khandwa, Khargone, Maihar, Mandla, Mandsaur, Mauganj, Morena, Narmadapuram, Narsinghpur, Neemuch, Niwari, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Sidhi, Singrauli, Tikamgarh, Ujjain, Umaria, Vidisha, Pandhurna.