Ghas Mandi is a locality of Gwalior served by Amit Glass Emporium. Our aluminium window systems use corrosion-resistant powder-coated profiles with multi-point locking, suited to Bhopal's seasonal heat and monsoon humidity.
Starting ₹350 – ₹750 per sq.ft
WhatsApp UsWeather and corrosion resistant, available in multiple finishes.
Enhanced security hardware on sliding and casement systems.
Built-in mesh track options for ventilation without pests.
Aluminium windows have become the default choice for new construction and renovation across Madhya Pradesh over the last decade, replacing older wood and steel frames in most residential and commercial projects. The shift is driven by aluminium's strength-to-weight ratio — profiles can be slimmer than wood or steel while carrying larger glass panes, which matters for both natural light and modern architectural lines. In MP's climate specifically, aluminium's resistance to warping, swelling and termite damage is a real practical advantage over wood, especially through the monsoon months when humidity causes wooden frames to swell and stick.
Powder-coated aluminium withstands MP's summer heat and monsoon humidity without warping, swelling or rotting the way wood does.
Aluminium's strength allows thinner frames than wood or uPVC, so more of the opening is usable glass — more light, better views.
No painting, sealing or termite treatment required — periodic cleaning and hardware lubrication is the extent of upkeep.
From slim minimalist casements to large-span sliders, aluminium adapts to both traditional and contemporary elevations.
Aluminium is fully recyclable without quality loss, relevant for projects targeting GRIHA or IGBC green-building points.
Two panels move horizontally on parallel tracks; one panel typically stays fixed. The most common and economical option for standard home openings.
Adds a third track for a fully openable configuration or an integrated mosquito mesh panel that slides independently — popular where ventilation control matters.
Side-hinged panels that swing outward, giving a tighter seal against dust and rain than sliders, at the cost of needing clearance to open.
Non-opening glazed panels used for light and views where ventilation isn't needed — often combined with an adjacent openable window.
Small top-hung or louvered units for bathrooms, kitchens and utility areas where constant ventilation is required without a full window.
| Item | Price |
|---|---|
| Sliding Window (2-track) | ₹350 – ₹550 / sq.ft |
| Sliding Window (3-track with mesh) | ₹450 – ₹650 / sq.ft |
| Casement Window | ₹450 – ₹650 / sq.ft |
| Fixed Window | ₹300 – ₹450 / sq.ft |
| Ventilator / Louvered Window | ₹300 – ₹450 / sq.ft |
| Premium System Windows (Domal/AluK/Tostem-type) | ₹850 – ₹1,400 / sq.ft |
Italian-origin profile system popular for contemporary, slim-sightline designs; among the most recognised names for engineered aluminium window systems in India.
One of India's largest aluminium extrusion manufacturers, supplying both raw profile and complete fabrication systems widely used by local fabricators.
DCM Shriram's fenestration brand, well known across India with strong retail presence and a full range spanning both uPVC and aluminium.
Part of Asahi India Glass, combining aluminium frames with in-house glass technology — relevant when high-performance glazing matters as much as the frame.
Hindalco's fenestration brand using a proprietary aluminium alloy; among the few brands independently WiWA (Wind-Water-Air) tested for Indian conditions.
Standard float glass — maximum light transmission, most economical, no privacy or heat control.
Acid-etched or sandblasted for privacy while still passing light — common for bathrooms and ground-floor windows facing the street.
Colored glass (bronze, grey, green) that reduces glare and some heat gain — a budget alternative to reflective glass.
Coated to reflect solar heat and glare, reducing indoor cooling load — worth considering for west-facing windows in MP's summer heat.
Two glass layers bonded with a PVB interlayer — holds together if broken, adding security and sound reduction.
Heat-strengthened for impact resistance and safe granular breakage — commonly specified for larger panes and ground-floor windows.
Two glass panes with a sealed air gap for thermal and acoustic insulation — the highest-performing but also highest-cost option.
Standard cam or hook locks securing sliding panels at the meeting rail.
Operating handle for casement and openable sliding panels — available in various finishes to match the frame.
Locks at multiple points along the frame simultaneously (common on casement systems) for stronger security than a single-point lock.
Dedicated track for a sliding insect mesh panel, usually paired with 3-track sliding systems.
Stainless-steel rollers for sliding panels — directly affects how smoothly (and how long) the slider operates without jamming.
Dampened closing action that prevents slamming — increasingly common on premium system windows.
Standard sliding or casement windows for bedrooms, living rooms and kitchens — the most common residential application.
Often specified with premium system brands and larger glass spans for architectural elevations.
Fixed or restricted-opening windows with easy-clean profiles, sometimes paired with laminated glass for safety.
Durable, low-maintenance sliding windows able to withstand high daily use.
Acoustic or double-glazed options where street noise or guest comfort is a priority.
Fixed glazing combined with openable sections, often specified alongside ACP cladding or curtain wall systems on the same façade.
Larger fixed panels and slim-profile systems to maximise street-facing glass display area.
Louvered or ventilator-style windows prioritising airflow over glazing area.
Aluminium windows need little upkeep compared to wood, but a few habits extend hardware life: clean tracks periodically to prevent dust and grit from causing rollers to stick; lubricate hinges, rollers and locks every few months, especially before monsoon; check and clean weatherseals annually since a degraded seal is the most common cause of water leakage; avoid abrasive cleaners on the powder-coated finish, which can dull the surface over time.